Overview to change Ford F150 Front lights Bulbs
On the current years, the ideal organisation to me is to replace the front lights light bulbs of Ford F150. They are still the H13 halogen light bulbs headlights. That is the factor why so lots of individuals choose the replace the headlight.
Luckily, you just need to transform the bulb part of it. Open the hood and you will notice a plastic panel that covers the front of the car. Remove this panel by prying the facility of the bolts that hold the panel in place. After you remove the panel you will see two bolts holding the headlamp in place. Remove both 13mm bolts and draw the headlamp assembly up and out of place. Remove the cover on the back of the headlamp assy by transforming it then can access to the bulb.
When launched the tab, pulled the front lights out and remove the wiring harness by pressing the tab in. It is the same to one more front lights housing. Remove the front two bolts, remove the plastic clip under the wheel and also press the tab up and launch the headlight.
Removing the dirt cover with an 8-millimeter socket, after removing the dust cover, eliminating the low beam. Twisting the light bulb counterclockwise, after that unclip the wiring harness from the bulb.
Refer to: https://www.customsportsspecial.com
Luckily, you just need to transform the bulb part of it. Open the hood and you will notice a plastic panel that covers the front of the car. Remove this panel by prying the facility of the bolts that hold the panel in place. After you remove the panel you will see two bolts holding the headlamp in place. Remove both 13mm bolts and draw the headlamp assembly up and out of place. Remove the cover on the back of the headlamp assy by transforming it then can access to the bulb.
When launched the tab, pulled the front lights out and remove the wiring harness by pressing the tab in. It is the same to one more front lights housing. Remove the front two bolts, remove the plastic clip under the wheel and also press the tab up and launch the headlight.
Removing the dirt cover with an 8-millimeter socket, after removing the dust cover, eliminating the low beam. Twisting the light bulb counterclockwise, after that unclip the wiring harness from the bulb.
Refer to: https://www.customsportsspecial.com
